Machinery

Thermoplastic pre preg Line

A thermoplastic pre-preg line is able to use carbon, natural fibers, aramid and fiber glass materials.

Using hot-melt technology connected with a volumetric pump under web drive and an independent delivery system, this up to a width of 500-1270 mm.

This highly sophisticated machinery operated within the aeronautic, aerospace, military, supercar and automotive industries,

They are also involved inhelicopter rotor blades with structural elements in composites. And special machines are supplied for manufacturing of space launch system (Vega) for ESA (European Space Agency).

Filament Winding Robot

A Filament winding robot is able to impregnate resins with dynamic shoot control. All this at high speed with complex non-cylindrical geometries.

This highly sophisticated machinery operated within the aeronautic, aerospace, military, supercar and automotive industries,

They are also involved inhelicopter rotor blades with structural elements in composites. And special machines are supplied for manufacturing of space launch system (Vega) for ESA (European Space Agency).

Automatic Tape Layer

An automatic tape layer is working with an accuracy of 0,3 mm on complex surface and with an advanced control of automatic deposition system.

This highly sophisticated machinery operated within the aeronautic, aerospace, military, supercar and automotive industries,

They are also involved inhelicopter rotor blades with structural elements in composites. And special machines are supplied for manufacturing of space launch system (Vega) for ESA (European Space Agency).

CNC 5 axis

Five axis milling is the leading CNC machinery in the field of composite and resins materials.

With more than 2300 soldunits, by our supplier, amongst which 95 % are 5 axis machining centres

We can confirm that the operating flexibility allows to use any type of material under unlimited shapes format ,to carry out any type of trajectories.

The accuracy is at his outmost level thanks to birotary heads and the adoption of direct measurements systems.

Our supplier is presenting eight high speed different models that will certainly fit your highly demanding requirements.

Waterjet Cutting

Waterjet technology allows through the emission of a very high pressure and speed jet of water up to 6200 bar to cut a very wide range of materials. The jet is obtained thanks to a small flow of water force through a calibrated thin nozzle with a diameter between 0,1 and 0,4 mm.

The jet pressure turns the water which reaches a speed fourtimes higher than the speed of sound into a real blade capable of cutting almost any materials from a few tenth of a millimetre up to 250 mm thickness this with an accuracy of tenth of millimetre.

For hardest material the waterjet is also supplemented with natural or synthetic scouring powder a technology knows as Abrasive Water Jet.

Waterjet cutting system are usually linked with CNC machinery and combined with CAD-CAM system.

7 Axis Milling System

State of the art 7 axis robotic system for milling and turning operations on models and prototypes made of resin, wood and other light materials.

The robotic system can be used as a flexible milling centre, combined with the versality and easiness of robot “simulator”a software expressly developed to bring out all its potential.

Our partner takes pride in being among the first companies to develop robotic systems targeting the artistic complex marble industry that they have translated into the high tech composite sector.

Without a doubt, the level of quality is backing our partner solutions and their innate affinity to continuous innovation.

Surface Finishing

We are able to propose the only robotic solution addressing the needs of all surface finishing processes: sanding, polishing, trimming of complex shapes at any scale or size.

A force feedback system allows to precisely control the force exerted on the treated surface, to achieve different results on the same workpiece, all while the speed control is continuously controlled via software.

The results are consistent and constant in time. The platform induces a remarkable time and cost savings, all under the most strict market quality constraints

Resin Infusion Systems

Specialized systems for infusion of two component resin are used in a number of applications starting from resin infusion in sport gear to fiber matting process in manufacturing of windmill rotor blades. The systems help to achieve an accurate ratio control throughout the infusion process while ensuring the best efficiency with the following features :
  • Flow rate : 9 to 30 kg /min
  • Mixing ration 100:20 up to 100:70
  • Electrrical load 4.5 KW
  • Viscosity 1500 Pa.s at 25 C for Resin
  • O.5o Pa.s at 25 C for Hardener
  • Intelligent reports, alerts and dashboards for process monitoring
  • Accurate mixing ratio and flow rates, easily configured as per application
  • Advanced Electronic controls for mixing and dispensing
  • Programmable shot sizes and repeated batch size controller
  • Dispensing mechanisms (remote/local activation) and tools (dispensing guns) designed to suit process needs
  • Flexible layout and dispensing options for variety of processes

Epoxy Dispensing Systems

Epoxy/Adhesive Mixing and Dispensing machines for Composite Products include highly accurate, electronically controlled, gear pump metering technology used in Open Mold, Closed Mold and Bonding processes.

Proven solutions for applications that require flow rate starting from 4 LPM to 35 LPM.

  • Meter Mix Dosing
  • Vacuum pump for degassing
  • Perfectly homogenized material
  • Accurate ratio control with precision metering pumps
  • Advanced electronic controls with HMIs
  • Variable Ratio, Precision Metering Gear Pump
  • Auto Refill of Resin/Hardenerf from Barrel To Tank
  • Tank size 5 ltr to 150 ltr

Pultrusion Machines

We are able to supply servo electric drive pultrusion machines with very long lifecycle combined with high energy efficiency and a PID control of heating zones.

The pulling system being without folded covering ,the pulling force is 10 to 400kN with a pulling speed of 0 to 3 per minute thanks to a pneumatic clamping system force of 20 to 800 kN

We provide also pulwinding machines , and cold plasma surface treatments systems for pultruded profiles.